Product introduction:

The guide rail type hydraulic lift cargo elevator is a non scissors type hydraulic lift platform, which is used for cargo transmission between the two and three floors of industrial plants, restaurants, and restaurants. Because the minimum height is 100-300mm, it is most suitable for industrial occasions where pit excavation is not possible. At the same time, it does not need upper lifting points. It has a variety of forms (single column, double column, four column), smooth movement, simple and reliable operation, and multiple hydraulic and electrical protection, Make the goods transmission between floors fast and economical. (It can be customized according to customer requirements, and the requirements of load capacity, lifting height, table size, applicable places, etc. shall be provided).

标准配置
■ 超低身高，无需挖地坑
■ 设有超载的安全保护装置
■ 停电情况下的应急下降装置
■ 设有防坠落装置
可选配置
■ 外围封护栏网格或者其他形式的安全护栏
■ 可选装安门机互动式安全门，平台超宽光幕感应
■ 液压系统可选进口产品
■ 电器可选装进口电器
■ 压力传感器，在超载的时候可以报警

Security and stability advantages:

The hydraulic elevator is equipped with the safety device of the traditional traction elevator, as well as:

Overflow valve: it can prevent the system pressure from being too high during upward movement;

Emergency manual valve: in case of power failure, it can make the lift car emergency descend to the nearest floor position to open the door;

Pipeline rupture valve: when the hydraulic system pipeline ruptures and the lift car stalls, it can automatically cut off the oil circuit to stop the descent

Oil temperature protection of oil tank: when the oil temperature in the oil tank exceeds the standard setting value, the oil temperature protection device will send a signal and suspend the use of the elevator. When the oil temperature drops, the elevator can be started.

Operation cost advantage:

Low failure rate: due to the advanced hydraulic system and good control mode, the failure rate of elevator operation can be minimized.

Low power consumption: when the hydraulic elevator goes down, it is driven by the pressure generated by its own weight, which saves energy greatly

Optional configuration:

1. Standard configuration: fence 1.5m high.

2. Optional: totally enclosed protective net, raised to 2m high protective net and other forms.

3. When it comes to the installed model, please be sure to inform our business personnel of the specific and detailed requirements, and we will provide you with detailed construction

Product features:
The guide rail type hydraulic freight elevator is mainly used for the up and down transportation of goods between various working floors, the lifting of cars between the floors of the three-dimensional garage and the underground garage, etc. The product is equipped with fall protection device and overload protection device, and operation buttons can be set on each floor to realize multi-point control. The utility model has the advantages of firm structure, large bearing capacity, stable lifting, simple and convenient installation and maintenance, and is an ideal cargo conveying equipment for replacing elevators between low floors. According to your installation environment and use requirements, we will provide you with complete solutions.